Below is an overview of the steps: • Connect one end of the Ethernet cable to the camera. Insert a microSD card (optional). Perform the camera mounting steps (Wall Mount or Pole Mount). Connect the other end of Ethernet cable to the PoE Adapter or a Ubiquiti Networks TOUGHSwitch™.
How do I access UniFi video?
The UniFi Video configuration portal is accessed by using a web browser. There are two ways to access the portal: Ubiquiti Device Discovery Tool For users with a DHCP‑enabled LAN and using the Chrome browser. Direct Connection to UniFi NVR Configure the UniFi NVR by connecting it directly to your computer via Ethernet.
Can you still use UniFi video?
On January 15th, 2021, UniFi Video will no longer be supported by Ubiquiti. … If you have a UniFi Video installation we recommend upgrading to UniFi Protect, Ubiquiti’s go-forward product for security camera installations.
How do I view ubiquiti camera?
You can view live and recorded footage from all your UniFi Protect cameras in the UniFi Protect application.
Download camera recordings
- Click the Events section in the left navigation bar.
- Select a motion or Smart Detection event to play its recording.
- Click Download.
How do I access my UniFi camera remotely?
Unifi Video Quick &, Easy Remote Access – YouTube
How do I add camera to UniFi video?
Steps: Token Adoption
- Navigate to the NVR’s Settings page.
- If the Camera Adoption Token field is empty, click NEW TOKEN. …
- Navigate to the camera’s web interface by entering its IP address in the browser.
- Enter the IP address of the NVR in the UniFi Video server field.
- Enter the Adoption Token in the Adoption Token field.
How do you use the UniFi video app?
Unifi Video Mobile App – YouTube
What happened to video UI com?
Phasing out UniFi-Video products
This means UniFi-Video products will no longer be offered or supported, beyond 2020. … All cloud operations will be shut down and video.ui.com will no longer be accessible.
What happened to UniFi Protect?
The Unifi Video NVR is being replaced by the UniFi Protect NVR which is an upgraded version of the NVR. If you want to continue to have access to your system remotely then you should ask us to supply and install a new UniFi Protect NVR.
Is UniFi Protect good?
2021 Review: Should You Get The UniFi Protect System? – YouTube
Can I use any camera with Ubiquiti?
What cameras and other devices are compatible? UniFi Protect is compatible with all G2, G3, and G4 cameras and doorbells with the prefix UVC (UVC, UVC-G3, and UVC-G4), as well as all Protect IoT devices with UFP and UP prefixes. Note: Aircams and cameras from third-party vendors are not by UniFi Protect.
What ports need to be open for UniFi Protect?
When Accessing the NVR from a Remote LAN:
|7080||TCP||HTTP Web UI &, API|
|7443||TCP||HTTPS Web UI &, API|
|7445||TCP||Video over HTTP***|
|7446||TCP||Video over HTTPS***|
Can’t connect to UniFi NVR?
Follow these steps to troubleshoot: Check the UI Status page to see if there is any issue on our side. Verify that the name of the NVR as shown in the UniFi Video Controller’s Settings matches how it appears in video.ui.com. If the NVR in question was restored from another UVC-NVR, it should be re-adopted.
How do I access my NVR remotely?
There are 6 steps to setting up your NVR for remote viewing:
- Understand Your Network.
- Setup DDNS.
- Setup A Port Forward.
- Assign The DDNS Hostname To Your NVR.
- Set Two IP Addresses For Your NVR.
- Verify That Local Viewing and Remote Viewing Work.
How do I upgrade to UniFi Protect?
Go to Cameras section (left-hand menu) to see the cameras managed by UniFi Protect. The camera firmware will upgrade and the camera will restart automatically. You can proceed to use UniFi Protect once the camera status is Online.
How do I add a camera to UniFi Protect?
Open the UniFi Protect app and tap Add when the device pop-up appears. If this prompt doesn’t appear, tap on the ellipse icon in the upper-right corner of the Cameras page and select Add Elements. Note: If no devices are discovered, a help wizard will launch and walk you through troubleshooting steps for the device.
What is camera token?
The token is for when the camera cannot be detected and subsequently adopted, such as on a layer3 network.
How do I reset my UniFi camera?
While the camera is powered on, press and hold the reset button for 10 seconds. Release the button (the LEDs will stop glowing). Do not disconnect the camera from its power source during the reboot process. The camera will restore factory settings after a few minutes.
Is UniFi Protect software free?
No Subscription Fees:
With UniFi Protect, there are no subscription fees to worry about whatsoever.
How do you set up UNVR?
Connect the UNVR to the internet by inserting one end of an Ethernet cable into its RJ45 port and the other into a UniFi Switch or LAN port. Set up the UNVR either on the Protect web application or via the Protect mobile app (available on the App Store and Google Play).
Is UniFi controller down?
Sorry if this is old news but i’m not clear what this means for those of us that host the unifi controller on non Ubiquiti platforms. The UniFi Cloud Controller service will be shut down after March 1, 2021.
What is UniFi protect app?
UniFi Protect allows users to set up, manage, and stream video from UniFi camera networks, directly from your smartphone or tablet. With no recurring fees, UniFi Protect offers one of the most cost-effective security solutions for commercial and residential applications.
Does UniFi NVR work with UniFi protect?
Will my existing video cameras work with UniFi Protect? Yes! You don’t need to buy new cameras to use UniFi Protect. All G2 and G3 UniFi Video Cameras will work with UniFi Protect.
Where does UniFi video save recordings?
The Default location of recordings are: Windows Default: C:ProgramDataunifi-videovideos. Linux Default: /var/lib/unifi-video/videos.
Can I run UniFi Protect on my own hardware?
Just like the Unifi Access Point and Network components, are the Unifi Camera and Protect system really easy to use. They integrate seaslessly together, but to be clear, you can use the Unifi Protect also on its own.
Is UniFi Protect worth it Reddit?
TLDR, I’m very happy with the switch to UniFi Protect. I’ve had no issues with the equipment. The video quality is amazing. If you are looking for a camera system that just works and has an app that doesn’t look like it was written in the stone ages then you might want to consider UniFi Protect.
How do you set up a Ubiquiti camera?
UniFi Video Initial Camera Setup – YouTube
Does Reolink work with UniFi?
When considering the Reolink or UniFi protect system it’s important to also look at the camera quality, since the Reolink NVR only works with Reolink Cameras, and the UniFi NVR only works with UniFi cameras.
Are Ubiquiti cameras proprietary?
NetXL primarily stocks Ubiquiti and Grandstream cameras, both of which offer a proprietary video management solution. Grandstream offers the GSURF VMS system free of charge. … When it comes to storage, you can set up cloud storage or use Ubiquiti’s own service.
What port does UniFi cameras use?
Connect and power all of your UniFi Video Cameras with a UniFi PoE Switch, a managed switch featuring configurable 802.3af/at PoE+. The UniFi Video software is pre-installed on the UniFi NVR for quick and easy deployment. The UniFi Video software can also be downloaded and installed on a Windows or Linux-based system.
How can I connect my CCTV camera to my phone?
HOW TO CONNECT CCTV TO ANDROID OR IPhone ?
- Step 1: CONNECT DVR TO MONITOR DIRECTLY. …
- Step 2: CONFIGURE CCTV DVR SETTINGS. …
- Step 3: NOW CONFIGURE WIFI ROUTER FOR DVR. …
- Step 4: CONNECT DVR TO WIFI VIA LAN CABLE. …
- Step 5: CHECK THE SETTINGS. …
- Step 6: NOW CONNECT TO ANDROID PHONE.
How do I connect my NVR camera to WiFi?
Step by Step Instructions
- Connect the NVR and IP Camera directly to your router or modem with a CAT5 cable.
- Open the ConfigTool and locate your NVR and IP Camera.
- Login to both using Internet Explorer. …
- On the NVR, go to Settings->,Network->,WiFi Device Manage. …
- On the IP Camera, go to Setup->,Network->,WiFi.
How do I connect my DVR to WIFI?
How to Connect a CCTV DVR to a Wireless Router – YouTube
How can I migrate my Unifi video deployment to a Unifi protect controller?
Unifi Video to Protect Migration
- Upgrade your Unifi Video. First, you need to make sure that your Unifi Video is updated to the latest version. …
- Create a backup of your Unifi Video. Open settings and click on Download Configuration in the top bar.
- Shutdown the NVR. …
- Set up your Unifi Protect. …
- Import the backup. …
- Import completed.